RCMC 3407 400KV V2 Motor
SKU:
$32.00
$32.00
Designed Specifically for Multirotors
The V2 is the same basic motor with some improvements in material, winding and design. The V2 has a higher quality winding material and pattern that boosts the motor's efficiency. We added long high quality silicon wire to the design for ease of assembly and no more magnet wire to deal with! The design is a few millimeters shorter and we also cut the weight down 5 grams. Over all, It's the same great motor with many small tweaks to improve it's performance and ease of use.
Efficiency and heat dissipation was the main goal in the design. Keeping your electronics cool not only makes everything last longer but it maximizes efficiency. The base is beefy and designed to draw heat out of the stator. The top has loads of open area to cool the top of the stator and windings. The prop adapter is also designed so that it can be removed for use of 12mm bolt on carbon props.
Features-Absurdly High Efficiency
-Low KV for 6S Lipo
-4mm Main shaft
-Japanese NMB Bearings
-Balanced for Jello free shots
-M6 Low profile prop adapter. (Optional CCW adapter available)
12mm adapter spacing for direct mount props.
Specs
Can Size: 41mm diamater - 23.5mm tall
Stator size: 34mm x 7mm(3407)
Weight:79g (Including adapter)
Wire Length: 300mm
Shaft Diamater: 4mm
Mounting pattern: M3 16/19mm
Recommended props in the 12-14" range.
The 12x4.5MR is a great match. Be careful pushing 14's. Certain 14" props can be too much prop for this winding.
The V2 is the same basic motor with some improvements in material, winding and design. The V2 has a higher quality winding material and pattern that boosts the motor's efficiency. We added long high quality silicon wire to the design for ease of assembly and no more magnet wire to deal with! The design is a few millimeters shorter and we also cut the weight down 5 grams. Over all, It's the same great motor with many small tweaks to improve it's performance and ease of use.
Efficiency and heat dissipation was the main goal in the design. Keeping your electronics cool not only makes everything last longer but it maximizes efficiency. The base is beefy and designed to draw heat out of the stator. The top has loads of open area to cool the top of the stator and windings. The prop adapter is also designed so that it can be removed for use of 12mm bolt on carbon props.
Features-Absurdly High Efficiency
-Low KV for 6S Lipo
-4mm Main shaft
-Japanese NMB Bearings
-Balanced for Jello free shots
-M6 Low profile prop adapter. (Optional CCW adapter available)
12mm adapter spacing for direct mount props.
Specs
Can Size: 41mm diamater - 23.5mm tall
Stator size: 34mm x 7mm(3407)
Weight:79g (Including adapter)
Wire Length: 300mm
Shaft Diamater: 4mm
Mounting pattern: M3 16/19mm
Recommended props in the 12-14" range.
The 12x4.5MR is a great match. Be careful pushing 14's. Certain 14" props can be too much prop for this winding.
